Printed Shadewalls

Our printed shadewall material is of the highest quality banner mesh – 30% Polyester / 70% PVC, 12 x 12 weave, light transmission 10% (openness), 80% UV Protection.

They come with binding all around the edges and black tie downs.

Choose your image from the following options:

1. Standard images (Prices and images below)
2. Choose and image from Pixarbay, copy send the image link to us. No extra cost)
3. Supply your own photo from a good camera. High resolution required and we recommend 300dpi. Extra charge if graphic design required. We cannot accept mobile or ipad images as the resolution is too small.

Measure your awning vinyl length or area – let us know if it is a wind out or pull out awning with a 4mm or 6mm spline or sail track or if velcro tabs are required.

Total weight: 4-7kg

Warranty: Three years

Delivery: Takes approximately 5 weeks for delivery as they are made to measure.

Note: We can not print onto existing shadewalls as we only print onto ink absorbent banner mesh which is custom made.

Our Printed Shadewalls are made in Australia.

Care Instructions: Keep rolled up, not folded. Wipe down with damp cloth, no detergents or chemicals required. We do not recommend rolling your printed shadewall into your awning as it could cause the awning damage.