Brand: Enerdrive
Stock: Available to order
Dimensions: 35.60cm x 20.60cm x 9.90cm
Manufacturer Part Number (MPN): EN32430

Price: $1,099.00

- +

Enerdrive ePOWER 24V 30A 3-Output Smart Battery Charger

The Enerdrive ePOWER 24V 30A charger is a fully automatic, set-and-forget multi-stage AC battery charger for permanent connection to 24V truck, boat or off-grid battery banks. It can charge up to three separate battery banks, with bank 1 fully isolated and able to use a different charge algorithm from banks 2 and 3.

Features

  • Three outputs — one fully independent, two common with diode isolation
  • User-adjustable output current — for example, reduced to run from a small generator
  • Load-based regulation to avoid holding batteries in bulk
  • Wide AC input — accepts 110V/60Hz and 240V/50Hz
  • Lithium mode plus Gel, AGM, Flooded and programmable
  • Backlit LCD display with set-and-select menu and fault codes
  • Silent mode — disables the fan and halves output for 12 hours
  • Temperature sensor included (7.5m cable)
  • Protection — reverse polarity, overcharge, over-temperature and output short circuit

Backed by a 5-year Enerdrive manufacturer's warranty. An optional remote display (EN3REM) is available separately.

Brand: Enerdrive ePOWER

Model / MPN: EN32430

Output current (max): 30A

Charge voltage: 28.4 – 31.0V

Float voltage: 26.8 – 27.6V

Equalise voltage: 32.0V

DC output banks: 3 (one fully independent, two common with diode isolation)

Battery types: Gel, AGM, Flooded, Lithium, Programmable

AC input: 100–240 VAC, 47–63Hz (207–265 VAC range at 5.9A max)

Power consumption: 1050W at full load

Efficiency: Over 82%, with power factor correction

Cooling: Forced air, thermostatically controlled fan

Ingress protection: IP32

Operating temperature: -20°C to 60°C

Standards: AS/NZS 60335.2.29

Dimensions (L x W x H): 356 x 206 x 99mm

Weight: 4kg

Warranty: 5 years

Is this charger for 12V or 24V batteries?

This model is for 24V battery banks. For 12V systems see the Enerdrive ePOWER 12V chargers.

What are the three outputs for?

They let you charge up to three battery banks. Bank 1 is fully independent and can use a different charge algorithm from banks 2 and 3.

Can it charge lithium batteries?

Yes. It has a dedicated lithium mode as well as Gel, AGM, Flooded and a programmable profile.

Does the price include GST?

Yes, all prices shown on the site include GST.

Do you ship NZ-wide?

Yes, we ship throughout New Zealand.

What warranty does it have?

Enerdrive products carry a 5-year manufacturer's warranty.

There are no reviews for this product.
Write a review

Important Notice

While we make every effort to ensure all product information, specifications, images, and pricing on this website are accurate and up to date, errors and omissions may occasionally occur. Product descriptions may contain inaccuracies, and details can change without notice.

We strongly recommend confirming critical information with our team prior to purchase, especially where compatibility, measurements, or technical specifications are essential.

We appreciate your understanding and encourage you to contact us if you notice any discrepancies.

Open hours

     Sales    Service
Mon-Thu:   9 am - 5 pm   9 am - 5 pm
Fri:   9 am - 4 pm   9 am - 4 pm
Sat:   10 am - 2 pm    Closed
Sun:   By Appointment   Closed
We're closed on public holidays 

Contact Us

Sorry, this website uses features that your browser doesn’t support. Upgrade to a newer version of Firefox, Chrome, Safari, or Edge and you’ll be all set.