Victron SmartSolar 100V/30A MPPT Solar Charge Controller

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48 V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen. The load output is short-circuit proof.

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100 %. From that point onwards, the load disconnect level will be modulated so that a nearly 100 % recharge is achieved about once every week

VE.Direct 

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Battery voltage (auto-select): 12/24V Auto Select
Rated charge current: 30A
Nominal PV power, 12V: 440W
Nominal PV power, 24V: 880W
Max. PV short circuit current: 35A
Automatic load disconnect: Yes
Max. PV open circuit voltage: 100V
Peak efficiency: 98%
Self-consumption: 12V: 230 mA, 24V: 20 mA
Charge voltage 'absorption': 14.4V / 28.8V (adjustable)
Charge voltage 'float': 13.8V / 27.6V  (adjustable)
Charge algorithm: multi-stage adaptive
Temperature compensation: -16 mV / °C resp. -32 mV / °C
Protection: PV reverse polarity /Output short circuit / Over-temperature
Operating temperature: -30 to +60°C (full rated output up to 40°C)
Humidity: 95%, non-condensing
Data communication port: VE.Direct

ENCLOSURE
Colour: Blue (RAL 5012)
Power terminals: 16 mm² / AWG6
Protection category: IP43 (electronic components), IP22 (connection area)
Weight: 1.3 kg
Dimensions (h x w x d): 130 x 186 x 70 mm

Is GST included in the price?
Yes — all prices shown include 15% New Zealand GST.

Do you ship across New Zealand?
Yes. Rolleston Caravans dispatches nationwide and freight is calculated at checkout. Pickup from our Rolleston store is also available.

Will the Victron SmartSolar 100V/30A MPPT Solar Charge Controller suit my caravan or setup?
Check the measurements in the Specifications tab against your available space and fitting. If you're unsure, contact us with your caravan make and model and we'll confirm compatibility.

What warranty applies?
This product is covered by the manufacturer's warranty. Get in touch with our team if you need to make a claim or have a fault.